Arthur Miller, 1953 Essays

Arthur Miller, 1953 Essays Arthur Miller, 1953 Essay Arthur Miller, 1953 Essay Miller choose to have this moment, in Act 4, because it shows how Proctor dies after the moment. In this moment, Proctor is signing a confession to show he has met the Devil, and to say he has not had an affair, [PROCTOR now lays the paper down and signs his name]. It links what has gone before, because he was locked in jail, and this shows how he is going to save his life by signing a confession paper, I confess to God, and God has seen my name on this! It is enough! Not just because it is relevant in the story, but it is a good device for the audience as well, because it gives the audience a sense that he is heroic. With this scene it shows first how he gives up and signs a confession paper, but then he has a change of heart and rips the paper [hysterically, as though the tearing paper were his life], saying he has never seen the Devil. This gives the audience a sign of relief, because he has done the right thing. This moment will give the audience a final decision about how good Proctor is for now I do think I see some shred of goodness in John Proctor. But some people may think he is not a good and heroic man, because of his affair with Abigail Williams, and that Proctor is letting people have pain, because he is a very important man to his friends, family and Elizabeth, [ELIZABETH, in a burst of terror, rushes to him and weeps against his hand]. Your left to decide how good he is. For this moment, Miller may have shown Proctor as Jesus. He has given his name up to show his honour to his friends who are going to die showing there innocence. Jesus is the same, a good man, letting himself die for the causes and deaths of his fellow friends. It is now six months later and autumn, though the American term fall, used by Miller, seems far more suitable considering where we have now come to in the play As well as the darkness of the setting, we are struck by the emptiness of the room. Miller mentions no furniture other than two benches and a lantern on the wall. Here life is stripped down to the bare minimum. It is in this setting that Proctor will have to search his conscience, his inner self, and make the crucial but basic decision whether to live or die. In one interpretation, a video 1996 Nicholas Hytner film, the setting is outside. It is beside the sea, which I guess is on the edge of Salem. It is early in the morning because the sun is starting to rise up. It was set at the seaside because it shows that the play is ending on a good sunny note. Also the sea is better than the Salem meeting house, because it shows the rise of Proctor. It is ironic because the seaside shows good, and is like a rise to heaven, another reason for the sea to be chosen, but Proctor is dieing, not showing good. Although he is dieing and rising up to heaven, he is dieing like his loyal friends. The background of the sea is lighter, than in the courtroom, the sea makes Proctor look more heroic to the audience. As this key moment is set in autumn, and it is in the morning, when the sun is coming through. Light is not much used in the key moment, but until John Proctor says his name is important, Because it is my name! Because I cannot have another in my life! , and then he rips the piece of paper there is a stage direction [hysterically, as though the tearing paper were his life] this shows lightning coming through. As we know light is shown shining down on Jesus when he heals somebody, light comes through the windows to show how good Proctor is. In the interpretation, the sun comes up and shines, again showing Proctor as Jesus, doing the right thing to stick with what is truthful, that he has not seen the Devil. In one interpretation, a video 1996 Nicholas Hytner film, music is there as dramatic devices. The stances are relevant to. When Proctor is answering to Danforths questions if he has seen certain people with the Devil. Danforth is standing up behind a small table, and Cheever and Parris are there, are three wearing black. Proctor is in very old cloths, all thilthy, but this gives him more power, firstly it shows he is given up, that he has seen the Devil, his cloths taking him down, even though he is saving his life, but the cloths are significant because Jesus wore bad cloths, ripped and torn, but he was dieing for his fellow friends like Proctor. The three behind the table: Cheever on the left Danforth in the middle, and Parris on the right, looks like they are the high people, there are high in reputation, but Proctor is low, and only wearing bad ripped cloths. When he rips the paper, there is a drumbeat, and this changes everything, because then Proctor is more of the higher reputation. Music is used when Danforth asks if he has seen certain people with the Devil, he carries on saying no. His no is important to show how weak he has become, so music makes it more dramatic to emphasise on the rhythm of Danforth and Proctor saying no. Before my key moment starts, which is when he starts to sign the paper Proctor starts to get questioned by Danforth Mr Proctor, have you seen the Devil in your life? and then the dramatic devices is used upon Proctor [PROCTORS jaws lock. ] and also afterwards [through his teeth, his face turned from REBECCA] all shows how weak Proctor is. His knows that all of this is wrong to confess, but he is saying it, and going ahead like his wife had told him. The stage direction which says [astonished] when Rebecca is talking, is no surprise, because she knows, Elizabeth knows and Proctor himself knows that he is doing the wrong thing, by confessing. Now the Key moment starts when Proctor is signing his name on a paper, to show his confession, the stage direction says [CHEEVER goes to PROCTOR, the confession and a pen in hand. PROCTOR does no look at it] which again proves he is doing the wrong thing, which he knows. The stage direction after says [after glancing at the confession] and then the quote You have all witnessed it it is enough. this shows how he is trying to resist the paper, and thinks that the paper of his confession is a lot worse then to say it out to the judges. He knows this confession is wrong, but he does not want a paper to give evidence he confessed he has been with the Devil. It makes others, who died, annoyed and disappointed with Proctor; he is a good man and would die for his loyal friends, he is a good man. After that he starts to sign the paper with the stage direction [His breast heaving with agonized breathing. PROCTOR now lays the paper down and signs his name] which shows the impact of Proctor. He is full of anger and knows that he has been beaten to sign the confession paper. So this is a dramatic device, to show how he hates this paper, and does not want to sign it. Danforth is eager to have this paper, but does not to show it. He wants to tell everybody that Proctor has confessed, and is a good man, even though he is not. Miller choose this stage direction, [perplexed, but politely extending his hand], to make Danforth look less eager then he usually is, but Proctor takes his the wrong way again. He thinks that Danforth is going to take it away and show everybody, but thats not true as seen [as though PROCTOR did not understand], and Proctor shows weakness and gives away slightly, that he did not want for this to all go through. Others did not complain any further to show they have confessed as said by Proctor after You will not use me! I am no Sarah Good or Tituba, I am John Proctor! As this argument carries on Danforth get suspicious [with suspicion] and is wondering why Proctor is resisting for Danforth to take the paper. Proctor gives in, and [with a cry of his soul] Proctor says it is his name, and this shows that he does not want to give his name corruption; he wants his friends, who are dead or dieing, to know he is better then the confessors. Danforth is so astonished, [pointing at the confession in Proctors hand] and he answers, Is that document a lie? and [PROCTOR is motionless] and [PROCTOR does not reply]. He realises he has said the wrong thing, and he has given in, not saving his life. At this point he is in a dilemma, to say he has seen the Devil, or he has not. Before he was going through that he has seen the Devil, in the middle of this key moment, he is in the dilemma, and so he must now say he has not seen the Devil, which means torture. This is true because the stage direction, and dramatic device is used [His breast heaving, his eyes staring, PROCTOR tears the paper and crumples it, and he is weeping in fury, but erect]. He has though that this is the true and desirable answer he wants to show. He shows now he is strong, and the paper is historic as well [hysterically as though the tearing paper were his life]. The paper is a dramatic device because it represents the confession, but it is a lie. When he rips it he rips the confession, and the lie, which represents Danforths triumph over Proctor. It allows use to see Proctors change of heart. Contrasting considerations of self-interest lead Danforth and Parris to beg John Proctor to confess to witchcraft. While Parris fears for his safety, Danforth operates to defend the court from any more attacks. The change in Danforths open desire is very important because previously, Danforth meant to confirm the goodness of the court, but here he suggests corruption to protect the political value of the government; he worries if postponing the executions, it will show weakness on him and part of the court. By prompting Proctor to give a false confession, Danforth indicates that he likely believes the witchcraft charges are false. This shows how the witch hunts have gained a life of their own; the reputation and hierarchy lead the court to continue with the case and executions even when the original delay of the trials was a bad idea and even when the people who run the trials are concerned about the power of the charges. When Proctor says, Because it is my name! Because I cannot have another in my life! this shows how he cares for his name like when he cleaned his name about his lechery, his affair with Abigail Williams. When he said, I have known her, sir. I have known her. which he releases his secret about his affair, and this is cleaning his name, like when he rips the paper and does not agree that he has seen the Devil. He is cleaning his name. Of course there is speech in the key moment, which is not truthful, but nobody is speaking truthful. Proctor saying he has meet with the Devil. As you can see by Danforth asking Mr Proctor. Did you bind yourself to the Devils service? and then Proctor saying I did. This we know is not true because before he was accused of seeing the Devil, all down to Mary. She is a weak person, and Abigail was tormenting her, showing the judges that Mary was hurting her, which is not true. Then when Mary was getting weaker and weaker, she gives in and says she has seen the Devil, but Proctor is been seeing the Devil as well Youre the Devils man! and then He come at night and every day to sign, to sign, to -. There is some dramatic irony involved in the key moment but it is not as strong as the first key moment I choose. The dramatic irony involved in this key moment is when Proctor says he has been with the Devil, even though he has not. He at first signed a paper for confession, showing he has seen the Devil. It is dramatic irony for the audience because Proctor is doing the wrong thing, and confessing for being accused, which is not true. Proctor would not usually do this, because he likes to keep his name clean from anything, which is why he teard down his name, that he had an affair with Abigail. But this time he did not tear down his name showing he has not seen the Devil, he tries to save himself I did. Conclusion The Crucible is always related to themes, because it is based on real true issues. Here are themes related to the two key moments: Reputation Reputation is very important in the religious Salem, where public and private goodness are important. In an atmosphere where reputation shows an important role, the fear of blame by friendship become s particularly evil. Focused on a high public reputation, the people of Salem fear that the sins of their friends and other important people will hurt their names. Some characters think their name is to be protected and their respective reputations. John Proctor especially thinks his name should not be harmed, and will tell the truth to keep his name clean. Early in the play, he has a chance to put a stop to the girls accusations, but his desire to keep his reputation makes him from testifying against Abigail. At the end of the play, however, Proctors need to keep his good name leads him to make the brave choice not to make a false confession and to go to his death without signing his name to something he hasnt done. By refusing to surrender his name, he frees himself for his earlier failure and dies with honour. Danforth is very powerful the Act 3 key moment Power- The witch trials allow many characters in the play who are previously edgy in the Salem society. In general, women are low ranked, doing the housework etc, compared to the male-dominated Sale. They have little options in life and work as servants for townsmen, until they can get married, and having kids. For this reason, Abigail is a slave to John Proctors sexual desire, but he strips away her purity when he commits adultery with her, and he provokes her nasty jealousy when he terminates their affair. Abigails accusations of witchcraft and Devil-worship immediately command the attention of the court. By supporting herself, in the eyes of others, with Gods will, she gains power over society, as do the other girls in her pack, and her word becomes incontrovertible, as do theirs. Accusations, Confessions, and Legal Proceedings- The witch trials are central to the action of The Crucible, and dramatic accusations and confessions fill the play. In the first act, before the hysteria begins, Parris accuses Abigail of dishonouring him, and he then makes a series of accusations against his parishioners. Giles Corey and Proctor respond in manner, and Putnam soon joins in, creating a group of accusation even before Hale arrives. The entire witch trial system relies on accusations, the only way that witches can be seen, and confessions, which provide the proof of the honesty of the court actions. Proctor attempts to break this with a confession of his own, when he admits to the affair with Abigail, but this confession is false from the accusation from Elizabeth. Proctors brave decision, at the end of the play, to die rather than confess to a fault that he did not do, he finally breaks the cycle. The court collapses afterwards, undone by the negative responses of its victims to spread lies. The Witch Trials and the Witch Hunt- There is hardly any symbolism within The Crucible, but, in total, the play can be seen as symbolic, the fear about communism. Miller has this matter in his play. In that while there were no actual witches in Salem, there were Communists. However, Millers concern in The Crucible is not with whether the accused actually are witches, but rather with the opposition of the court officials to believe that they are not. In light of the witch-hunt extremes, which hurt many innocents, this was felt strongly in Millers own time. Good and evil- One very important battle that is not very obvious in the story is with God and the Devil, being good and evil. The question is will the accused people be sent to heaven with the good God or will they burn in hell with the evil Satan? This is mainly what the whole play is based on. The puritan religion is the reason for why the people are being executed. The forces of good always tried to do what was best for everybody, even if it meant breaking some puritan laws. The evil group did whatever was best for them. They were greedy and had no consideration for others. The moment, which is most dramatic, is the 1st one in Act 3 because it leads up to a very important factor for the final Act. When Elizabeth says no, this is very relevant to the whole story because it shows Proctor was lying about his affair with Abigail Williams, and that she will not get charged for lying about the whole witchcraft. The story would of ended on Act 3 but it went on. This does not show why it is the most dramatic, but it is a good idea to make it the most dramatic moment, that is why I think Miller made this moment dramatic, because it is very important to the play. The play is a full of emotions for the audience, different all the way through. Miller takes the audience on this roller coaster ride by making them experience hatred, love, confusion and intrigue by using the characters as different tools. The audience are to have mixed feelings for certain characters, some members of the audience do not like Proctor for his adultery, others give him sympathy and think he is heroic at the end of the plays. The play in its entirety is an oblique comment on 1950s situation in America; it was not simply that, it has emotions and real characters. It is an intricate web of relationships and hidden priorities from each character, which together makes for a complex, but an enclosing play. The way the audience feels gets Millers message through. The play is relevant nowadays for many reasons: because it links with the situation in Afghanistan how people are tortured if they do not apply Sadam as the Prime Minister, also the film versions of the play it is exciting to watch because of the high tension and quite fast pace throughout, it incorporates dramatic irony to make the audience part of the action. The play is twisted and left on a cliffhanger, like soaps, which shows how the play is relevant to today and the audience of today. The whole thing about lechery and sexual interest can link to soaps and it is like a soap opera, and is artistically pleasing for the audience. The girls hysteria gives play excitement and activity, something physical to watch if you do not understand the words. The play can appeal to religious people, for new views and ideas, historians, real events, and people young adults, for excitement women, for love story The first key moment in Act 3 was the best. It is full of tension and at the end of the moment it ends with dramatic irony and irony. This moment catches me as the audience, and the way Elizabeth avoids the question, builds my interest in the story. When she says No, sir I wanted to go on, because I wanted to know what is going to happen now. The second key moment in Act 4 also was good; I found it hard for me as the audience. When he signed the paper of his confession, I though he has done the wrong thing, even though it is to save his life. Other people may disagree, but I think Hale was not so good as others would think. If I were him I would die a honourable man so I could be placed in history books, and known as a good man, instead of saving your life for a name. But then Proctor came to his senses and he changed his mind, which made the audience fell more relieved because he shows his true self, a heroic man, like Jesus, and dieing to show he is honourable and his loyalty with his friends who are going to be hanged. I have thoroughly enjoyed reading The Crucible, and even though it is about events that happened over 300 years ago, it still holds an uncanny relevance because, sometimes, we can see ourselves in Arthur Millers characters. Perhaps The Crucible can so relevant that it helps to stop terrible tragedies like the witch hunts happening again in the future.

The 5 Best Schools to Earn a Human Resources Degree + What You Can Do With It

The 5 Best Schools to Earn a Human Resources Degree + What You Can Do With It SAT / ACT Prep Online Guides and Tips When you hear the term â€Å"human resources† or â€Å"HR,† what do you think of? You’ve probably heard it quite a few times, whether that’s from your business courses, the news, or even as you’ve researched potential majors. One of our favorite examples of someone who works in human resources is the character Toby fromThe Office. Toby’s job was to keep Michael Scott, Dunder Mifflin’s off-the-wall regional manager, in check. (If you’ve ever seen The Office, you know that was an impossible order!) And if you remember Toby, you’ll also recollect that he was also considered a wet blanket and no fun. But despite its portrayal in The Office, working in human resources is actually an excellent fit for anyone who enjoys working with people and shaping a company’s policies. This article will not only introduce you to the human resources degree, it will also give you a peek at the doors it can open for you. What Is Human Resources? So if human resources isn’t the snooze-fest that The Office makes it out to be, then what is human resources, exactly? Human resources is the department in a company or business that â€Å"is focused on activities relating to employees.† In other words, the human resources team’s whole job is to handle any organizational, policy, or staffing issue as it relates to the people who work at a company. That means that human resources is a vital part of any healthy business! The duties of a human resources department vary depending on the size and structure of a company, but in general, it handles all the personnel (or employee) issues for the business. This includes things like hiring employees, training new team members, implementing new employee-oriented programs, managing employee benefits, protecting employees’ legal rights, helping employees advance in their careers, keeping everyone motivated, and establishing/maintaining the company’s culture. It might make more sense if you think of a business like a car. If executives are the drivers and employees are the engine, then people who work in human resources are mechanics. They help make sure that the car is running as smoothly and efficiently as possible! What Does a Career in Human Resources Look Like? The human resources field is robust and offers people career opportunities in an incredible variety of sub-fields that range from personnel management to corporate training. Here are four human resource jobs that you might not have known existed! HR Specialist Median annual salary: $60,350 If you get a degree in human resources, you’re qualified to enter a company as an HR specialist. HR specialists handle a wide variety of human resources tasks, especially when it comes to recruiting, interviewing, and hiring employees. Because this isn’t an entry-level position, HR specialists often deal with more complex HR issues, like administering benefits, addressing internal problems, and developing company strategies, too. Training and Development Manager Median annual salary: $87,700 An HR Training and Development Manager is in charge of all the education, training, and career development for employees within a company. Often, they develop unique training sessions, classes, and workbooks specific to their company and its needs. People who excel as a training and development manager enjoy helping people learn and grow. Their job is to make sure that everyone has access to the materials and knowledge they need to have great careers! Executive Recruiter Average annual salary: $78,785 Executive recruiters are talent scouts for companies. Their job is to help large companies and corporations fill empty leadership positions with the best and brightest people. Executive recruiters have to be insightful and persuasivenot only do they need to understand what the hiring company needs, they have to convince executives to take a chance on a new role, too. (Many times, executive recruiters are courting people who already have jobs at other companies.) Additionally, some executive recruiters have the potential to earn financial bonuses for successful hires...so this job can be a lucrative one! Labor Relations Specialist Median annual salary: $83,298 A labor relations specialist serves as the intermediary between labor unions and a company. Not only do they negotiate with unions, they also help draft contracts, too. It’s important for a labor relations specialist to understand local, state, and federal labor laws. It’s also their job to make sure their company complies with all the important labor regulationsso this is a great position for anyone interested in working in a legal field! Operations Manager Median annual salary: $63,708 Becoming an operations manager isn’t strictly a human relations job, but it’s a common career path for people who start off in a human relations field. Operations managers’ job is to make sure all of the operational aspects of a company are running smoothly. This includes overseeing product development and manufacturing, making sure deliverables make it to clients on time, and working to keep projects on budget. In bigger companies, operations managers also serve as important members of the leadership team! This job is a fantastic fit for highly organized people who like jobs with lots of variety. What Is a Human Resources Degree? A human resources degree program is a specialized course of study that prepares you for a career as a human resources professional. It combines classes in general businesslike business management and strategywith others designed to help you manage the personnel issues a business might face. Unlike some fields, you can earn a human resources degree on four different tiers: the associate level, the bachelor level, and the master level, and the Ph.D. level. Associate’s Degree Some community colleges offer associate’s degrees in human resources. These are normally two-year degrees that you complete on a community college campus in your city or through a distance learning program associated with a community college in your state. People who have associate’s degrees in human resources are often considered generalists, meaning they don’t specialize in a specific field of human resources, like benefit management or training. That means their degree will qualify them for entry-level positions, like human resource clerk or assistant recruiter. Some companies offer people with associate’s degrees on-the-job training so they can advance into more specialized, higher-paying roles as they grow their career. So an associate’s degree in human resources is a great option for anyone who isn’t a good fit for a four-year degree but still wants to enter a job field with the potential for advancement! Bachelor’s Degree The bachelor’s degree is by far the most common human resources degree. Most large universities offer a human resources program, which is usually run through an institution’s business school. These four-year programs offer a comprehensive business education that includes overviews of business management, practices, and finance. But more importantly, bachelor’s programs provide a comprehensive education in the field of human resources, and they equip graduates to start their careers in a variety of different business environments ranging from small, local companies to national non-profits. Additionally, some bachelor’s programs allow students to specialize in a specific sub-field of human resources, like organizational development or human resources management. This allows students to find better, higher paying jobs right out of school (and qualify for general HR positions, too). Master’s Degree People who pursue master’s degrees in human resources have their sights set on leadership positions. Earning a Master’s of Business Administration (MBA) degree with an emphasis in human resources can lead to roles like directorships, or even becoming the vice president for human resources at a larger company. In general, an MBA in human resources takes two years to complete. The MBA in human resources is even more concentrated than the bachelor’s degree, meaning that students will take more rigorous, more in-depth courses about human resources and the future of the field. Consequently, that means there’s no standard course load for this type of degree. Each program is different, so you’ll want to do your research before committing to a specific university. PhDDegree A PhD is the highest degree you can earn in any field, and the PhD in human resources is no different. People who pursue a PhDare preparing themselves to enter academia (as a professor) or related research fields. Unlike other degree programs which focus on the practical application of human resources principles, PhD programs are designed with research in mind. Students work with faculty advisors to undertake new, unique research projects related to human resources. A PhD in human resources can take anywhere from four to seven years to complete. Online Degree As education has moved into the digital age, so have degree programs. Schools across the United States offer online-only human resources degree programs...which means you can earn an associate’s, bachelor’s, or even master’s degree from the comfort of your own home! Online degree programs have the added benefit of letting you learn at your own pace, so if you’re a working student, this could be an excellent option for you. One word of caution, though: the online education space is rife with potential scammers. Make sure that you’re signing up with an accredited, non-profit university! You should research both the program and school so that you know you’re participating in a legitimate program. A picture of Cornell University in Ithaca, New YorkMaeshima Hiroki/Wikimedia Top 5 Human Resources Programs in the United States If you want to get a human resources degree, you have lots of schools to choose from. We looked through programs from across the nation to put together our best-of-the-best list. #1: Cornell University Cornell takes the top spot on our list because a) it’s one of the best schools in the nation and b) it offers human resources degrees on the bachelor, master, and Ph.D. level. That means that Cornell boasts some of the best professors in the United States, so you’re guaranteed to get a great education. Additionally, Cornell’s ILR School offers a unique approach to the undergraduate degree. Not only does it offer state-of-the-art human resources education, it also boasts an interdisciplinary program that lets students stretch their studies into other related fields like law and social justice. This program is great for curious students who want to take their human resources career to new heights. #2: University of Nebraska The University of Nebraska offers a human resources management undergraduate degree, which is a great fit for anyone interested in moving into a management or director role during the course of their career. Because the program focuses on leadership, the College of Business offers students tons of networking opportunities through student organizations like Enactus and Alpha Kappa Psi. The school also gives students access to the Center for Entrepreneurship, which connects students to alumni and business partners around the state. This gives students who may want to start their own human resources businesses or consultancies a leg-up before they ever graduate. #3: Rutgers University Rutgers University snags the number three spot on our list because of its balance between degree offerings and course selection. The school offers bachelor’s and master’s degrees in human resource management, but it also offers an online program and minor programs, too. Students have lots of options, so they can choose the HR program that’s right for them. Additionally, the School of Management and Labor Relations takes an interdisciplinary approach to learning. Students studying human resources also learn about business strategy, psychology, economics, and sociology while engaging in cutting-edge research in the HR field, too. Students with HR degrees from Rutgers are ready to succeed in multiple business arenas as soon as they graduate. #4: Michigan State University Unlike some of the universities on this list that roll their human resources degrees into their business programs, Michigan State University has a whole school dedicated to studying human resources. The School of Human Resources and Labor Relations prides itself in making sure their students get a robust educational experience while preparing for the workforce. It’s one of the only HR-specific schools that also offers a study abroad program, which is great for anyone interested in entering the international human relations field. But more importantly, when you graduate with a degree in human resources from Michigan State, you’re practically guaranteed success. In fact, 98 to 100 percent of students land a paid internship while in school (at companies like Boeing and Microsoft!), and 98 percent of students will have a job by the time they graduate. #5: Purdue University Purdue is not only one of the top universities in the nation according to U.S. News and World Report, but it also has a top-tier human resources program, too. Students who decide to pursue a human resources degree will enter a rigorous program that fully integrates with the Society for Human Resource Management Certified Professional (SHRM-CP) exam, which is the industry-leading certification program for HR professionals. In addition to taking incredible classes, students also have the opportunity to gain experience in working with big data through Purdue’s state-of-the-art Analytics lab. The program even offers a combined minor in business management to prepare students for business leadership positions! What’s Next? If you’re reading this article, you might be struggling to pick a college major. And you’re not alone! The process is really hard, especially for people who are interested in lots of things. Here’s a guide that can make the process a little easier. If you really can’t narrow your choices down, you might be a good candidate for a double major. But what is a double major, exactly? Here’s an expert guide that tells you everything you need to know about double majors and the double majoring process. But the first step to majoring is getting into college. If you want to go to the school of your dreams, you need to get great test scores. You can learn what constitutes a good score on the SAT by clicking here. (More of an ACT person? We’ve got you covered, too.)

Microprocessors advancement generations Research Paper

Microprocessors advancement generations - Research Paper Example Microprocessors or processors are the core components of any information system contributing to the goals of an organization. The microprocessor or processor â€Å"interprets and carries out, or processes, instructions and data contained in the software† the microprocessor evolved from the creation of transistors in to integrated circuits. Moreover, the integration of these components is vast in this current age of information technology, where every now and then, computing devices are expanding their usage beyond imagination and finds a new product to take their place. Today, microprocessors are comprised of over millions of transistors that are integrated to a small chip that can be easily located on the fingertips (Betker, Fernando and Whalen 29). However, the factor that makes these microprocessors better from the other is the speed on which it operates. Microprocessor clock speed is measured in Mega Hertz (MHz), Giga Hertz (GHz) and TeraFLOPS. Microprocessors Advancement Generations The first general purpose microprocessor, composed on a single chip was launched in 1971. The microprocessor was capable to operate on an eight-bit architecture along with the implementation capacity of four bits. Moreover, the microprocessor includes 2300 transistors with a capability to perform less than 0.1 million instructions per second (MIPS). After the invention of the first general purpose microprocessor, 8008 right bit microprocessor was invented. The microprocessor was built on 3500 transistors as compared to the general-purpose microprocessor with 2300 transistors.... Moreover, a language was also introduced for operating the system named as assembly language. The processor was built on 29000 transistors along with features including memory protection and floating point co processor. Moreover, in 1981, IBM a company for manufacturing commuting devices launched the latest version of Intel’s 8086. The microprocessor was named as 8088. The second generation was triggered by a significant improvement in the architecture of microprocessors as Motorola launched the first 32-bit microprocessor named as Motorola 68000. The processor was equipped with general-purpose registers supporting less than 1 million instructions per second. Motorola 68000 was used with Apple Mac, Silicon graphics and Apollo systems. The third generation was started by the first commercial microprocessor named as MIPS2000 based on Reduced Instructions Set Computing (RISC). Moreover, the processor supported instructions and data cache simultaneously. As compared to the previou s processor supporting less than one MIPS, MIPS 2000 was capable of providing five to eight MIPS. The total transistors that were embedded on the processor were 125,000 thousand. The fourth generation of microprocessors was started by the introduction of 64-bit architecture. The processor supporting the 64-bit architecture was MIPS 4000. As compared to the third generation microprocessor i.e. MIPS 2000, MIPS 4000 capability was unmatched. Instead of installing the caches separately on the motherboard of the computer, it was integrated in the microprocessor. The features for integrated cache are on chip and off chip i.e. as a secondary cache. Moreover, floating point was also integrated on the chip. The microprocessor is

Health Discrimination in Hong Kong Essay Example | Topics and Well Written Essays - 1500 words

Health Discrimination in Hong Kong - Essay Example Body In order to fix the health inequities which relate to gender in Hong Kong, possible health care priorities in health policies must include HIV/AIDS screening and treatment opportunities open to all citizens regardless of gender or sexual orientation. Another health priority would be the improved access to women seeking maternal and child care before, during, and after their pregnancy. Gender inequities can sometimes be apparent in relation to access of healthcare programs for women sex workers and for homosexuals (Abdullah, et.al., 2000). These gender inequities must be set aside especially as far as AIDS screening and treatment is concerned. Instead, reforms must include the establishment of mandatory annual screening for STDs and AIDS among sex workers (Wong, 2003). This access must be made available to male, female, including homosexual sex workers and anyone seeking access to these same health services. No discrimination in terms of gender must be made before such services c an be accessed. This mandatory screening would help manage the AIDS problem in Hong Kong, and ensure that the numbers of AIDS sufferers would decrease. Health reforms should also target the prioritization of services for health workers in relation to AIDS. AIDS has become one of the rapidly growing health issues in the world; it is also one of the most preventable diseases, especially with proper health education and the application of other preventative remedies, like mandatory annuals AIDS and STD screening (Wong, et.al., 2006). Access of sex workers to health services is often hampered by their limited financial resources; moreover, the health system does not make these screenings available to all sex workers due to their limited resources. In effect, future health policies must prioritize the allocation of funds for these mandatory annual screenings for high-risk women and other sex workers (Wong, et.al., 2006). Considerations of income or gender must not be made a basis for who the recipients of these screening services. Inequities in this regard must be neutralized. Future health policies on addressing the gender disparities in health must also include the establishment of outreach clinics for sex workers (Wong, 2003). These specialist centers would help ensure that female sex workers would be able to gain access to essential services based on their convenience. The clinics would be open at hours convenient to them and it would also reduce the stigma from the rest of society (Wong, 2003). In other words, health reform also means accepting the fact that some females work in the sex industry, and the fact that these activities are basically against the law should not be their basis for gaining access to essential health services (Wong, 2003). Female sex workers are fully aware of the fact that there is a stigma against them from the general population; for which reason, they also prefer not to access health services from the main hospitals for fear of bein g stigmatized. Moreover, society, including hospitals can indeed discriminate against them in terms of equal access to health services (Wong, et.al., 2006). Future reforms in health care must therefore include a more specific program which would

Character Analysis of the Grandmother in Flannery O'Connor's story A Essay

Character Analysis of the Grandmother in Flannery O'Connor's story A Good Man is Hard to Find and Mrs. May in the story Green - Essay Example Flannery O’Connor’s â€Å"A Good Man is Hard to Find† is a story about a family that is going to Florida on vacation. However, on the way, they have an accident, and end up meeting an escaped convict and his posse, who end up killing the whole family. â€Å"Greenleaf† by Flannery O’Connor is a story about a widow, Mrs. May, who has singlehandedly, and without the help of her two adult sons, run a farm for fifteen years. She does not like her employee Greenleaf, nor his family. The story conveys her contempt and enviousness at seeing her employee’s sons succeed when hers have not, at least according to her standards. It ends by Mrs. May dying by being gored by a bull. The stories, written by the same author, do have some similar themes, however, the object of this paper is to identify the similarities of the protagonists of the two stories – the grandmother in â€Å"A Good Man is Hard to Find† and Mrs. May in â€Å"Greenleaf.â⠂¬  There is a definite sense in both stories that the protagonists are very aware and conscious of their social standing. What is more, they seem to revel in it, to the point where they think that they are not â€Å"common† folk, so to speak. The grandmother in â€Å"A Good Man is Hard to Find,† while going with her family to the vacation, appears to be very conscious of the sort of clothes she has worn. It is explained that the reason for her to have done so is that in case they are involved in an accident, she wants others to know that she was a lady (422), and not a common woman. In order to keep up that appearance, she does not even allow her grandchildren to throw an empty sandwich box and the paper napkins out of the car window after they had a snack during the car ride. Mrs. May, in â€Å"Greenleaf,† also seems to harbor such ideas about herself. She does not like the idea that her son has become an insurance-man to African-Americans, or a â€Å"nigger insur ance-man† as she calls it (451). One of her biggest fears is that her sons, who are unmarried, will marry â€Å"trash,† thereby ruining everything she had sought to achieve, which is of course her social standing, or what she deems it to be. Another similarity between the two protagonists is that both of them are quite controlling. The grandmother wants her son to change her plan of vacation because she wants to go somewhere else, and for that she uses the excuse of The Misfit, the renegade convict right when the story starts. What is more, during the trip when she wants to visit her old house, she makes up a story to entice her grandchildren who, as expected by her, make a clamor till the father agrees to take them there (425). Mrs. May, similarly, seems to have a very controlling attitude. Even though throughout she has a feeling that she is the victim as nobody would help her, however, it is clear that she is the controlling one in the family – she does not wa nt to let go of the control she has over her sons. This is apparent from the way she gets her will changed so that even after her death her sons would not opt to marry, what she deems to be, low born girls, by putting in a proviso that if they do so, their wives would not inherit any money from them (451). Lastly, both the protagonists had a complicated relationship with their children. Bailey seems to be quite reluctant to listen to his mother, the grandmother of â€Å"A Good Man is Hard to Find.† What is more, he does not really associate with her much. Throughout the story, he seems aloof from her. Mrs. May’s sons, also, do not really have a close relationship with their mother. They do not follow in her footsteps to take over the farm, instead both of them go out and seek other professions. What is more, they do not appear sympathetic to their mother’s pleas either. This is perhaps due to the fact that she is controlling and feigns her victimization too much for their taste. Either way, the sons are not at all close to their mother nor are they supportive of her in any

Popularity of Timber Frame Construction

Popularity of Timber Frame Construction 1.0 INTRODUCTION This report will look at the increasing popularity surrounding timber frame construction in the construction industry. It will look at why this trend is continuing across the UK and how this form of construction can be applied to various building types. Timber frame construction is most notably used in parts of the world such as USA, Canada and Australia but it is being used more frequently throughout the UK in more recent times as well. Year on year the market share for timber frame construction has increased. Scotland is leading the way in this field by using timber frame construction much more than their neighbours. The timber sourced for this type of construction can readily be found in Scotland and this may go some way to explaining why it is indeed so popular in Scotland. 1.1 FACTS AND FIGURES; For the tenth consecutive year; the market share for timber frame construction has increased, 25% of all new houses in the UK are timber frame, As previously stated, Scotland is the most popular country for timber frame construction in the UK but even considering this; 75% of all new houses in Scotland are timber frame and that percentage continues to rise. Also, even during a recession when the construction industry has possibly been hit as hard as any other industry; timber frame construction only dropped by 26% while other construction methods dropped almost 38% in 2008. UK timber frame association preview 2010 page 5 (www.timber-frame.org) The trend is also growing outside of the UK, in Ireland for example. This is endorsed by the following quote. à ¢Ã¢â€š ¬Ã…“Timber frame homes currently account for 25% of new build homes in Irelandà ¢Ã¢â€š ¬? (www.ramstowndevelopments.com) 2.0 METHOD OF CONSTRUCTION Timber frame construction means that the weight-bearing walls are indeed timber panels. In other buildings this could be steel or blocks for example. These timber panels are made off site to an exact size and when they are required, they are simply transported by truck from the factory to the site. They can then be installed by men using pulleys and ropes or if the panels are too large and heavy- a small crane can be used to carry out this task. The panel itself is usually made up of solid timber- to take the load of the structure and this is sheathed usually by plywood or OSB- Oriented Strand Board, which is usually sourced from Scotland. These members ensure that the panel has suitable strength and is also rigid. Once the timber frame installation is complete, the external leaf of the building can then be installed. This can be brickwork or any form of cladding or a rendered finish. There are in fact two types of panels available- namely the Open Panel meaning the panel will be dry-lined after the insulation, vapour layer and services have been installed on site. The other panel is the Closed Panel and is this case this is all done in the factory. UK timber frame association preview 2010 page 11 (www.timber-frame.org) There have also been advances in the design of I-Joists in timber frame systems. There are now lighter I-Joists available but they have the greater strength and durability because the flanges are wider and the joist itself is not solid wood as has been the case in previous years- it can simply be plywood or OSB. PLATE 1; Image showing lightweight I-Joists, which are easier to handle but still strong enough to withstand the load being rested on it; due to the wide flanges. (www.framewiseltd.co.uk) 2.1 BALLOON FRAME There are actually two forms of timber frame construction. These are called Balloon Frame and Platform Frame. Balloon Frame has been superseded nowadays by Platform Frame but a brief outline is explained on both. The Balloon Frame form of construction simply means that the studs that make up the exterior wall are one long section which spans from the ground to the ceiling height of the top floor. à ¢Ã¢â€š ¬Ã…“A balloon frame consists of two-storey height panels with an intermediate floor suspended from the formwork.à ¢Ã¢â€š ¬? Chudley and Greeno (2008, p.386) Problems are obvious with this form of construction; Fire can spread easier because of the large panels Large panels may be more difficult to find Large panels will also be more difficult to handle Heating bills could be higher because there is no insulation between a room and the exterior walls Drawbacks such as these mean that the Platform Frame is more popular and is used today in preference to the Balloon Frame. 2.2 PLATFORM FRAME As previously mentioned, this is the form of timber frame construction favoured today in the UK. It differs from the Balloon Frame, as the structure is built up floor by floor. Basic sequence of events would include; Engineer calculates out sizes required by looking at the clientà ¢Ã¢â€š ¬Ã¢â€ž ¢s drawings Materials ordered and prefabricated in factory Materials arrive on site- only as required Base of the structure is marked out Timber floor joists are lifted into place using a small crane Walls are erected and positioned on top of floor joists- again using a small crane Prefabricated roof is also positioned in by a crane on top of the wall panels Cavity barriers/fire stops are installed Felt and battens are applied to roof- structure is now watertight External layer can now be can applied as well as tiles or slates on the roof Internal services can now be installed   Ãƒâ€šÃ‚  Ãƒâ€šÃ‚  Ãƒâ€šÃ‚   PLATE 2; Image showing a floor being lifted into position by crane (www.ramstowndevelopments.com) (sketch 2 drawings from page 171 of chudley greeno) 3.0 ADVANTAGES OF TIMBER FRAME Timber frame construction holds quite a few advantages over brick and block or steel frame construction; Quick to erect- can be completed faster than using brick and blocks as there is no need to wait for mortar to dry. Also, timber can still be installed in the rain; when brick or blocks canà ¢Ã¢â€š ¬Ã¢â€ž ¢t and is also not affected by the frost like mortar is. Easy to transport- panels, trussed roofs, timber floors etc are easily loaded on to a lorry and delivered on site as needed also ensuring the site isnà ¢Ã¢â€š ¬Ã¢â€ž ¢t cluttered up with materials that are not yet needed. Easy for the Contractor to forecast the completion date of the project- the job will run on time easier and will not be delayed due to weather as wintry conditions can delay progress on site. Cleaner site- as everything is measured to specification; there will be very little material waste on site meaning more profits, less money spent on dumping waste in landfills and less chance of an injury also. Smooth and dry- the surface is easy to decorate and also easy to render. Better quality- as the frame is fabricated off site to meet Building Regulations; there is less chance of human error. Can be installed by small crane to meet a tight deadline or by workmen as a cheaper option. Extensions can easily be incorporated, as timber and plasterboard are easier to remove than blocks. Also easier to design a building to suit the clientà ¢Ã¢â€š ¬Ã¢â€ž ¢s exact taste and possibly make a building unique form others. (www.trada.co.uk) Once the shell of the building is complete- this means it is watertight and the internal works can begin. It only takes around 5 days to achieve a watertight house. 3.1 THERMAL PERFORMANCE Timber is an excellent insulator and this in turn means that timber framed buildings store heat very well. This therefore leads heating bills being reduced, which in turn also means less fossil fuels are being used- be it oil for central heating or coal for a fire. How much money can be saved on heating bills varies and bold claims are made about this. It is hard to calculate because other factors need to be considered such as the specification of the building, the occupants of that building and so on. One timber frame company called Ramstown Developments claim that à ¢Ã¢â€š ¬Ã…“Timber framing is an energy saving system that cuts an average of 33% off the annual cost of heating your home.à ¢Ã¢â€š ¬? (www.ramstowndevelopments.com/) How accurate these figures are will be open to debate but there is little doubt that timber frame construction does have an advantage when it comes down to thermal performance. Many different timber frame companies exist and because of this they will specify the materials and construction and installation of the components slightly differently, thus giving slightly different results. However, the UK Timber Fame Association, who represents over 85% of UK timber frame manufacture states that à ¢Ã¢â€š ¬Ã…“Using a standard timber frame system achieves U-values between 0.30 and 0.27 using readily available and standard insulation- and using higher performance insulation and insulating breather membranes can boost these figures even more.à ¢Ã¢â€š ¬?(www.timber-frame.org) The keyword in the aforementioned statement is standard- meaning this is the minimum level of thermal performance that can be expected, so obviously this can be improved upon by having a higher specification. One such company is à ¢Ã¢â€š ¬Ã…“Scotframeà ¢Ã¢â€š ¬? who have designed a timber frame system which has a U-value of 0.11 which is very impressive when the U-value limit for walls in 1965 was actually 1.7. The system is a closed timber-framed panel, usually includes140mm  studs sheathed both sides with Oriented Strand Board (OSB) and factory filled with Polyurethane foam insulation. The internal side of the panel has a vapour control heat reflective membrane  and an air gap is created between this and the internal wall cladding to make a service zone.  The exterior side has a breathable waterproof membrane and 50mm of  polyurethane foam cavity insulation. To prove that these panels are indeed extremely thermally efficient- they have been tested by the National Physical Laboratory who confirmed a U-value of 0.11 W/m2K; when the external cladding is taken into account. This system can be installed without the cavity insulation- but as can be expected, the U-value results will not be as good. This system from Scotframe actually meets the meets the C02 targets which have been set at intervals of 2010, 2013 and 2016- at this stage. (www.scotframetimberengineering.co.uk/) PLATE 5; Image showing what the Scotframe system compromises of. (www.scotframetimberengineering.co.uk/) 3.2 ACOUSTIC PERFORMANCE Since timber frame performs so well in thermal performance, it isnà ¢Ã¢â€š ¬Ã¢â€ž ¢t very surprising to gather that it also performs well in the acoustic aspect also. This could be largely down to the fact that so many layers can absorb sound just like curtains and carpet absorbs sound better than an empty room with hard surfaces. In fact à ¢Ã¢â€š ¬Ã…“BREs Case study TF2000 found that even a multi-storey project would out perform building regulations for acoustic insulation.à ¢Ã¢â€š ¬?(www.framewiseltd.co.uk) This statement therefore echoes these thoughts and actually emphasises that it more than satisfies Building Regulations. What is even more interesting is that this is not for a small cosy dwelling- it is actually in terms of a multi-storey structure. 3.3 FIRE PERFORMANCE Timber is more susceptible to fire than materials such as concrete, bricks, blocks or steel. This however, does not mean that timber frame structures are more of a fire hazard. Timber frame structures are more likely to be burnt down during the actually construction phase, when the installation is not complete. This could be due to an accidental fire starting on site or probably the more likely case of vandalism. The HSEà ¢Ã¢â€š ¬Ã¢â€ž ¢s figures of 11 fires each day in the construction industry advocates this theory. Fire Safety on Timber Frame Construction Sites, page 5 highlights this, à ¢Ã¢â€š ¬Ã…“Governmentà ¢Ã¢â€š ¬Ã¢â€ž ¢s annual UK fire statistics show that two thirds of fires in construction industry premises are started deliberately.à ¢Ã¢â€š ¬? (www.timber-frame.org/) Fires that do start accidentally will not spread as easily once the installation has been complete, because the fire resistant plasterboard will see to this and also the external cladding will prove a difficult surface for the fire to engulf. There are of course ways in which the threat of fire can be minimised; Design out the need for hot-works, i.e. working with a blowtorch. If hot-works are required then that area should be monitored for 1 hour and again 2 ours later as a precaution. Keep the site tidy with no timber shavings or pieces of paper lying around, as these could start a fire easily (this of course would be good practice on any construction site) Ensure good site security to keep potential thieves and vandals at bay- again just like on any construction site. Fire Safety On Timber Frame Construction Sites page 10 (www.timber-frame.org) At this stage it should be stressed that timber frame construction is quick to install and because of this it is easy to reach a point when fire resistant materials are in place and the risk of fire is therefore greatly reduced. Also, cavity fire barriers will reduce the spread of fire. They are placed at openings in external walls, at corners, at each floor level, at eaves level, around pipes, cables etcà ¢Ã¢â€š ¬Ã‚ ¦ It is also worthy to mention that timber frame buildings do of course have to pass the relevant Building Regulations; as fire is a very serious matter. So if they satisfy these needs; they are as safe as any other form of construction in that aspect. 4.0 ENVIRONMENT Terms such as C02 emissions, global warming, carbon footprint and greenhouse gases are often the topic of conversation in todayà ¢Ã¢â€š ¬Ã¢â€ž ¢s world. Everyone is being urged to think about the environment and the construction industry is probably under the microscope as much as any other sector. As mentioned previously one of the advantages of timber frame construction is that it reduces the effects of burning fossil fuels- such as oil or coal. This therefore means it also minimises the greenhouse effect as well. Unlike steel or concrete- there is no need for any manufacturing, refining or extracting as timber is natural. à ¢Ã¢â€š ¬Ã…“Strength for strength, concrete uses 5 times (and steel uses 6 times) more energy to produce than timberà ¢Ã¢â€š ¬?(www.timber-frame.org) à ¢Ã¢â€š ¬Ã…“Overall C02 emissions for timber construction (the em-bodied carbon are up to six times lower than the emissions associated with masonry construction materialsà ¢Ã¢â€š ¬? UK timber frame association preview 2010 page 19 (www.timber-frame.org) That statement may not hold much relevance until the Governmentà ¢Ã¢â€š ¬Ã¢â€ž ¢s stance on this subject is made clear- à ¢Ã¢â€š ¬Ã…“Come October 2010, the Government will slash the level of permissible CO2 emissions generated by new builds by 30%. There is a further reduction of 30% planned for 2013 and yet another of the same amount due to come in to force in 2016à ¢Ã¢â€š ¬?(www.scotframetimberengineering.co.uk/) This further proves just how big of a concern this matter is and that the Government are acting quickly and have very clear targets in mind for the future. Some timber frame companies are also trying to convey this message to the public, as advocated by Deeside timber frame- à ¢Ã¢â€š ¬Ã…“Raise awareness of environmental issues with our customers, suppliers and staffà ¢Ã¢â€š ¬? is listed as one of their objectives regarding environmental matters. (www.deesidetimberframe.co.uk) Also, since timber is being sourced locally; in Europe and frequently in Scotland- it means there is no long journeys to transport the material overseas as can often be the case with steel when it is in short supply. 4.1 SUSTAINABILITY Timber is a very sustainable material. This is simply due to the fact that the timber comes from managed forests and for every tree that is cut down- two are planted to replace it. As well as this; the Government also introduced a scheme titled the Code for Sustainable Homes in 2006. UK timber frame association preview 2010 page 7 (www.timber-frame.org) To summarise, this basically states that the Government wants homes to be more energy efficient and that Level 3 is the basic standard expected in the average housing scheme, with this rising to a Level 6 for all new homes by 2016. Issues which affect what level the structure will be credited with depend on two things- how energy efficient the buildings fabric is and also how the material itself was sourced. Timber can achieve a good rating on both fronts because as previously mentioned; it is easy to source and doesnà ¢Ã¢â€š ¬Ã¢â€ž ¢t have to be transported long distances and also timber frame buildings have a very good thermal performance and can reduce heating bills. 5.0 NON-DOMESTIC BUILDINGS AND OTHER PROJECTS It would be fair to say that when most people think of timber frame construction, they think of low rise buildings like domestic dwellings. However, timber frame buildings are not just bungalows and two storey houses. Timber frame buildings include hotels, student accommodation and such like. With Building Regulations always being updated and changed; à ¢Ã¢â€š ¬Ã…“Timber frame can currently go up to 18 metres within the current regulations. This has already allowed the construction of a 7 storey building in Bedminster in Bristol.à ¢Ã¢â€š ¬? (www.timber-frame.org) Further examples of surprising projects include a primary school which has over 400 children in attendance. St Lukeà ¢Ã¢â€š ¬Ã¢â€ž ¢s Primary School in the Wolverhampton area was actually completed in 16 weeks- which was 2 weeks ahead of schedule! It cost  £5.9m to construct and was given a rating of Excellent by BREEAM. This rating was of such a high standard that it is actually the first time it has been awarded to a building in Britain. (BREEAM is the BRE Environmental Assessment Method.) PATE 6; Image of St Lukeà ¢Ã¢â€š ¬Ã¢â€ž ¢s CE Primary School, Blakenhall Gardens UK timber frame association preview 2010 page 26 (www.timber-frame.org) Other such projects include a NHS Adolescent Unit in Wales, where in this instance timber frame was ideal due to the fact that it was manufactured offsite and this meant less time onsite, making noise and disrupting the patients. A further example includes the theatre that was built on the Isle of Mull. Since this structure would be subject to winds and rain- it would be anticipated that steel or concrete would be the material of choice. However, cost of transporting these materials proved to be a huge factor, coupled with the fact that once again timber frame could be installed much quicker. PLATE 7; Image of the new timber frame theatre on Isle of Mull UK timber frame association preview 2010 page 26 (www.timber-frame.org) As well as these structures, timber frame prototypes have also been erected to improve our knowledge and findings on the performance of timber frame. One such prototype is the Kingspan Lighthouse which was designed and built to show how well timber frame would or would not perform when the structure was going to be an unorthodox shape. As with all buildings, small faults were found and good feedback was received on how improvements could be made. However, a Level 6 rating under the Code of Sustainable Homes was reached- even though this target doesnà ¢Ã¢â€š ¬Ã¢â€ž ¢t need to be achieved until 2016. PLATE 8; Image of Kingspan Lighthouse which achieved a Level 6 rating. UK timber frame association preview 2010 page 9 (www.timber-frame.org) 6.0 MOISTURE CONTENT All timber that is to be used for construction purposes will have a certain moisture content. Different timbers will have different moisture content depending on their use. For example, timber that is going to be used at junctions in the building where dampness could form will need to have a low moisture content. Kilns are used to dry timber out to a certain specification. Moisture content can be calculated by completing the following calculation; à ¢Ã¢â€š ¬Ã…“Moisture Content %= (wet weight)-(dry weight)/ dry weight x 100%à ¢Ã¢â€š ¬? Chudley and Greeno (2007, p.175) 6.1 THREAT OF ROT Rot spreading throughout a building is the nightmare of every client and builder, as it can cause unlimited damage and mean that in the extreme cases the building cannot be repaired. However, à ¢Ã¢â€š ¬Ã…“Dry timberà ¢Ã¢â€š ¬?, which is a timber with a moisture content of under 20%, is not at risk of decay. Lyons (2007, p.105) noted that à ¢Ã¢â€š ¬Ã…“à ¢Ã¢â€š ¬Ã‚ ¦ the reduction in water content to below 20% will arrest any incipient fungal decay, which can only commence above this critical level.à ¢Ã¢â€š ¬? This should dispel any doubts that timber is very exposed to rot. Furthermore, the timber is also sprayed with necessary preservatives before installation to satisfy Building Regulation requirements. 7.0 CONCLUSION This report has briefly looked at how timber frame structures perform in numerous fields. It has also outlined how timber frame can be used in a variety of different structures- some of which many people would not associate timber frame construction with. It is therefore clear to see that this market will continue to grow, with the market possibly accelerating more so in Ireland in the near future. This is because Ireland is possibly the country which has the most room for growth in this sector, coupled with the fact that Scotland is nearby and would prove to be a very good source for timber. This report has also addressed concerns relating to timber and the perception many people still have about using timber in construction- such as fire hazards, risk of rot, unable to be used in multi-storey buildings; to name just a few. Once people are better educated and made more aware about using timber as the structure for buildings- then these myths will soon be dispersed. After all, as mentioned in the introduction; this form of construction is used in countries such as USA, Canada and Australia. It is of course the most popular form of construction used in the developed world- meaning it can handle the hot summers in Australia and also the windy wets nights and wintry conditions in Scotland. It has taken Britain and Ireland many years to adopt this practice and some will no doubt wish to never embrace timber frame construction. However, the old adage à ¢Ã¢â€š ¬Ã…“the times are changingà ¢Ã¢â€š ¬? certainly springs to mind at this point. With the Government endorsing the use of timber frame and with environmental and sustainability concerns the topic of conversation on a regular basis- this definitely seems like the route to take. à ¢Ã¢â€š ¬Ã…“Timber Frame is probably the biggest single advance in building methods in recent yearsà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬?(www.walkertimbergroup.com) The above quote certainly is a bold one but with the facts in figures produced in this report; it is hard to argue against such a statement. 8.0 REFERENCES- Websites Source- UK timber frame association preview 2010 (pdf file) (www.timber-frame.org) [accessed 4th February] Source-Fire Safety on Timber Frame Construction Sites (pdf file) (www.timber-frame.org) http://www.ramstowndevelopments.com/index.php?id=47 [accessed 4th February] http://www.framewiseltd.co.uk/Systems/i-joists-the-simple-framing-system.html [accessed 4th February] http://www.trada.co.uk/techinfo/library/view/6BA4B8A2-79A8-451B-AB6F-474D37137B4F/Timber+frame+construction+-+an+outline/ar01s02.html [accessed 5th February] http://www.timber-frame.org/html/Building_And_Construction/Benefits_of_Timber_Frame/ [accessed 5th February] http://www.scotframetimberengineering.co.uk/ [accessed 5th February] http://www.deesidetimberframe.co.uk/environmental.htm [accessed 5th February] http://www.walkertimbergroup.com/walkertimber/products/products/timberframe1 [accessed 5th February] Books Chudley, R., Greeno, R. (2008) Building Construction Handbook. 7th ed. Oxford: Elsevier Ltd Chudley, R., Greeno, R. (2007) Construction Technology. 4th ed. Essex: Pearson Education Limited Lyons, A., (2007) Materials for Architects Builders. 3rd ed. Oxford: Elsevier Ltd. Popularity of Timber Frame Construction Popularity of Timber Frame Construction 1.0 INTRODUCTION This report will look at the increasing popularity surrounding timber frame construction in the construction industry. It will look at why this trend is continuing across the UK and how this form of construction can be applied to various building types. Timber frame construction is most notably used in parts of the world such as USA, Canada and Australia but it is being used more frequently throughout the UK in more recent times as well. Year on year the market share for timber frame construction has increased. Scotland is leading the way in this field by using timber frame construction much more than their neighbours. The timber sourced for this type of construction can readily be found in Scotland and this may go some way to explaining why it is indeed so popular in Scotland. 1.1 FACTS AND FIGURES; For the tenth consecutive year; the market share for timber frame construction has increased, 25% of all new houses in the UK are timber frame, As previously stated, Scotland is the most popular country for timber frame construction in the UK but even considering this; 75% of all new houses in Scotland are timber frame and that percentage continues to rise. Also, even during a recession when the construction industry has possibly been hit as hard as any other industry; timber frame construction only dropped by 26% while other construction methods dropped almost 38% in 2008. UK timber frame association preview 2010 page 5 (www.timber-frame.org) The trend is also growing outside of the UK, in Ireland for example. This is endorsed by the following quote. à ¢Ã¢â€š ¬Ã…“Timber frame homes currently account for 25% of new build homes in Irelandà ¢Ã¢â€š ¬? (www.ramstowndevelopments.com) 2.0 METHOD OF CONSTRUCTION Timber frame construction means that the weight-bearing walls are indeed timber panels. In other buildings this could be steel or blocks for example. These timber panels are made off site to an exact size and when they are required, they are simply transported by truck from the factory to the site. They can then be installed by men using pulleys and ropes or if the panels are too large and heavy- a small crane can be used to carry out this task. The panel itself is usually made up of solid timber- to take the load of the structure and this is sheathed usually by plywood or OSB- Oriented Strand Board, which is usually sourced from Scotland. These members ensure that the panel has suitable strength and is also rigid. Once the timber frame installation is complete, the external leaf of the building can then be installed. This can be brickwork or any form of cladding or a rendered finish. There are in fact two types of panels available- namely the Open Panel meaning the panel will be dry-lined after the insulation, vapour layer and services have been installed on site. The other panel is the Closed Panel and is this case this is all done in the factory. UK timber frame association preview 2010 page 11 (www.timber-frame.org) There have also been advances in the design of I-Joists in timber frame systems. There are now lighter I-Joists available but they have the greater strength and durability because the flanges are wider and the joist itself is not solid wood as has been the case in previous years- it can simply be plywood or OSB. PLATE 1; Image showing lightweight I-Joists, which are easier to handle but still strong enough to withstand the load being rested on it; due to the wide flanges. (www.framewiseltd.co.uk) 2.1 BALLOON FRAME There are actually two forms of timber frame construction. These are called Balloon Frame and Platform Frame. Balloon Frame has been superseded nowadays by Platform Frame but a brief outline is explained on both. The Balloon Frame form of construction simply means that the studs that make up the exterior wall are one long section which spans from the ground to the ceiling height of the top floor. à ¢Ã¢â€š ¬Ã…“A balloon frame consists of two-storey height panels with an intermediate floor suspended from the formwork.à ¢Ã¢â€š ¬? Chudley and Greeno (2008, p.386) Problems are obvious with this form of construction; Fire can spread easier because of the large panels Large panels may be more difficult to find Large panels will also be more difficult to handle Heating bills could be higher because there is no insulation between a room and the exterior walls Drawbacks such as these mean that the Platform Frame is more popular and is used today in preference to the Balloon Frame. 2.2 PLATFORM FRAME As previously mentioned, this is the form of timber frame construction favoured today in the UK. It differs from the Balloon Frame, as the structure is built up floor by floor. Basic sequence of events would include; Engineer calculates out sizes required by looking at the clientà ¢Ã¢â€š ¬Ã¢â€ž ¢s drawings Materials ordered and prefabricated in factory Materials arrive on site- only as required Base of the structure is marked out Timber floor joists are lifted into place using a small crane Walls are erected and positioned on top of floor joists- again using a small crane Prefabricated roof is also positioned in by a crane on top of the wall panels Cavity barriers/fire stops are installed Felt and battens are applied to roof- structure is now watertight External layer can now be can applied as well as tiles or slates on the roof Internal services can now be installed   Ãƒâ€šÃ‚  Ãƒâ€šÃ‚  Ãƒâ€šÃ‚   PLATE 2; Image showing a floor being lifted into position by crane (www.ramstowndevelopments.com) (sketch 2 drawings from page 171 of chudley greeno) 3.0 ADVANTAGES OF TIMBER FRAME Timber frame construction holds quite a few advantages over brick and block or steel frame construction; Quick to erect- can be completed faster than using brick and blocks as there is no need to wait for mortar to dry. Also, timber can still be installed in the rain; when brick or blocks canà ¢Ã¢â€š ¬Ã¢â€ž ¢t and is also not affected by the frost like mortar is. Easy to transport- panels, trussed roofs, timber floors etc are easily loaded on to a lorry and delivered on site as needed also ensuring the site isnà ¢Ã¢â€š ¬Ã¢â€ž ¢t cluttered up with materials that are not yet needed. Easy for the Contractor to forecast the completion date of the project- the job will run on time easier and will not be delayed due to weather as wintry conditions can delay progress on site. Cleaner site- as everything is measured to specification; there will be very little material waste on site meaning more profits, less money spent on dumping waste in landfills and less chance of an injury also. Smooth and dry- the surface is easy to decorate and also easy to render. Better quality- as the frame is fabricated off site to meet Building Regulations; there is less chance of human error. Can be installed by small crane to meet a tight deadline or by workmen as a cheaper option. Extensions can easily be incorporated, as timber and plasterboard are easier to remove than blocks. Also easier to design a building to suit the clientà ¢Ã¢â€š ¬Ã¢â€ž ¢s exact taste and possibly make a building unique form others. (www.trada.co.uk) Once the shell of the building is complete- this means it is watertight and the internal works can begin. It only takes around 5 days to achieve a watertight house. 3.1 THERMAL PERFORMANCE Timber is an excellent insulator and this in turn means that timber framed buildings store heat very well. This therefore leads heating bills being reduced, which in turn also means less fossil fuels are being used- be it oil for central heating or coal for a fire. How much money can be saved on heating bills varies and bold claims are made about this. It is hard to calculate because other factors need to be considered such as the specification of the building, the occupants of that building and so on. One timber frame company called Ramstown Developments claim that à ¢Ã¢â€š ¬Ã…“Timber framing is an energy saving system that cuts an average of 33% off the annual cost of heating your home.à ¢Ã¢â€š ¬? (www.ramstowndevelopments.com/) How accurate these figures are will be open to debate but there is little doubt that timber frame construction does have an advantage when it comes down to thermal performance. Many different timber frame companies exist and because of this they will specify the materials and construction and installation of the components slightly differently, thus giving slightly different results. However, the UK Timber Fame Association, who represents over 85% of UK timber frame manufacture states that à ¢Ã¢â€š ¬Ã…“Using a standard timber frame system achieves U-values between 0.30 and 0.27 using readily available and standard insulation- and using higher performance insulation and insulating breather membranes can boost these figures even more.à ¢Ã¢â€š ¬?(www.timber-frame.org) The keyword in the aforementioned statement is standard- meaning this is the minimum level of thermal performance that can be expected, so obviously this can be improved upon by having a higher specification. One such company is à ¢Ã¢â€š ¬Ã…“Scotframeà ¢Ã¢â€š ¬? who have designed a timber frame system which has a U-value of 0.11 which is very impressive when the U-value limit for walls in 1965 was actually 1.7. The system is a closed timber-framed panel, usually includes140mm  studs sheathed both sides with Oriented Strand Board (OSB) and factory filled with Polyurethane foam insulation. The internal side of the panel has a vapour control heat reflective membrane  and an air gap is created between this and the internal wall cladding to make a service zone.  The exterior side has a breathable waterproof membrane and 50mm of  polyurethane foam cavity insulation. To prove that these panels are indeed extremely thermally efficient- they have been tested by the National Physical Laboratory who confirmed a U-value of 0.11 W/m2K; when the external cladding is taken into account. This system can be installed without the cavity insulation- but as can be expected, the U-value results will not be as good. This system from Scotframe actually meets the meets the C02 targets which have been set at intervals of 2010, 2013 and 2016- at this stage. (www.scotframetimberengineering.co.uk/) PLATE 5; Image showing what the Scotframe system compromises of. (www.scotframetimberengineering.co.uk/) 3.2 ACOUSTIC PERFORMANCE Since timber frame performs so well in thermal performance, it isnà ¢Ã¢â€š ¬Ã¢â€ž ¢t very surprising to gather that it also performs well in the acoustic aspect also. This could be largely down to the fact that so many layers can absorb sound just like curtains and carpet absorbs sound better than an empty room with hard surfaces. In fact à ¢Ã¢â€š ¬Ã…“BREs Case study TF2000 found that even a multi-storey project would out perform building regulations for acoustic insulation.à ¢Ã¢â€š ¬?(www.framewiseltd.co.uk) This statement therefore echoes these thoughts and actually emphasises that it more than satisfies Building Regulations. What is even more interesting is that this is not for a small cosy dwelling- it is actually in terms of a multi-storey structure. 3.3 FIRE PERFORMANCE Timber is more susceptible to fire than materials such as concrete, bricks, blocks or steel. This however, does not mean that timber frame structures are more of a fire hazard. Timber frame structures are more likely to be burnt down during the actually construction phase, when the installation is not complete. This could be due to an accidental fire starting on site or probably the more likely case of vandalism. The HSEà ¢Ã¢â€š ¬Ã¢â€ž ¢s figures of 11 fires each day in the construction industry advocates this theory. Fire Safety on Timber Frame Construction Sites, page 5 highlights this, à ¢Ã¢â€š ¬Ã…“Governmentà ¢Ã¢â€š ¬Ã¢â€ž ¢s annual UK fire statistics show that two thirds of fires in construction industry premises are started deliberately.à ¢Ã¢â€š ¬? (www.timber-frame.org/) Fires that do start accidentally will not spread as easily once the installation has been complete, because the fire resistant plasterboard will see to this and also the external cladding will prove a difficult surface for the fire to engulf. There are of course ways in which the threat of fire can be minimised; Design out the need for hot-works, i.e. working with a blowtorch. If hot-works are required then that area should be monitored for 1 hour and again 2 ours later as a precaution. Keep the site tidy with no timber shavings or pieces of paper lying around, as these could start a fire easily (this of course would be good practice on any construction site) Ensure good site security to keep potential thieves and vandals at bay- again just like on any construction site. Fire Safety On Timber Frame Construction Sites page 10 (www.timber-frame.org) At this stage it should be stressed that timber frame construction is quick to install and because of this it is easy to reach a point when fire resistant materials are in place and the risk of fire is therefore greatly reduced. Also, cavity fire barriers will reduce the spread of fire. They are placed at openings in external walls, at corners, at each floor level, at eaves level, around pipes, cables etcà ¢Ã¢â€š ¬Ã‚ ¦ It is also worthy to mention that timber frame buildings do of course have to pass the relevant Building Regulations; as fire is a very serious matter. So if they satisfy these needs; they are as safe as any other form of construction in that aspect. 4.0 ENVIRONMENT Terms such as C02 emissions, global warming, carbon footprint and greenhouse gases are often the topic of conversation in todayà ¢Ã¢â€š ¬Ã¢â€ž ¢s world. Everyone is being urged to think about the environment and the construction industry is probably under the microscope as much as any other sector. As mentioned previously one of the advantages of timber frame construction is that it reduces the effects of burning fossil fuels- such as oil or coal. This therefore means it also minimises the greenhouse effect as well. Unlike steel or concrete- there is no need for any manufacturing, refining or extracting as timber is natural. à ¢Ã¢â€š ¬Ã…“Strength for strength, concrete uses 5 times (and steel uses 6 times) more energy to produce than timberà ¢Ã¢â€š ¬?(www.timber-frame.org) à ¢Ã¢â€š ¬Ã…“Overall C02 emissions for timber construction (the em-bodied carbon are up to six times lower than the emissions associated with masonry construction materialsà ¢Ã¢â€š ¬? UK timber frame association preview 2010 page 19 (www.timber-frame.org) That statement may not hold much relevance until the Governmentà ¢Ã¢â€š ¬Ã¢â€ž ¢s stance on this subject is made clear- à ¢Ã¢â€š ¬Ã…“Come October 2010, the Government will slash the level of permissible CO2 emissions generated by new builds by 30%. There is a further reduction of 30% planned for 2013 and yet another of the same amount due to come in to force in 2016à ¢Ã¢â€š ¬?(www.scotframetimberengineering.co.uk/) This further proves just how big of a concern this matter is and that the Government are acting quickly and have very clear targets in mind for the future. Some timber frame companies are also trying to convey this message to the public, as advocated by Deeside timber frame- à ¢Ã¢â€š ¬Ã…“Raise awareness of environmental issues with our customers, suppliers and staffà ¢Ã¢â€š ¬? is listed as one of their objectives regarding environmental matters. (www.deesidetimberframe.co.uk) Also, since timber is being sourced locally; in Europe and frequently in Scotland- it means there is no long journeys to transport the material overseas as can often be the case with steel when it is in short supply. 4.1 SUSTAINABILITY Timber is a very sustainable material. This is simply due to the fact that the timber comes from managed forests and for every tree that is cut down- two are planted to replace it. As well as this; the Government also introduced a scheme titled the Code for Sustainable Homes in 2006. UK timber frame association preview 2010 page 7 (www.timber-frame.org) To summarise, this basically states that the Government wants homes to be more energy efficient and that Level 3 is the basic standard expected in the average housing scheme, with this rising to a Level 6 for all new homes by 2016. Issues which affect what level the structure will be credited with depend on two things- how energy efficient the buildings fabric is and also how the material itself was sourced. Timber can achieve a good rating on both fronts because as previously mentioned; it is easy to source and doesnà ¢Ã¢â€š ¬Ã¢â€ž ¢t have to be transported long distances and also timber frame buildings have a very good thermal performance and can reduce heating bills. 5.0 NON-DOMESTIC BUILDINGS AND OTHER PROJECTS It would be fair to say that when most people think of timber frame construction, they think of low rise buildings like domestic dwellings. However, timber frame buildings are not just bungalows and two storey houses. Timber frame buildings include hotels, student accommodation and such like. With Building Regulations always being updated and changed; à ¢Ã¢â€š ¬Ã…“Timber frame can currently go up to 18 metres within the current regulations. This has already allowed the construction of a 7 storey building in Bedminster in Bristol.à ¢Ã¢â€š ¬? (www.timber-frame.org) Further examples of surprising projects include a primary school which has over 400 children in attendance. St Lukeà ¢Ã¢â€š ¬Ã¢â€ž ¢s Primary School in the Wolverhampton area was actually completed in 16 weeks- which was 2 weeks ahead of schedule! It cost  £5.9m to construct and was given a rating of Excellent by BREEAM. This rating was of such a high standard that it is actually the first time it has been awarded to a building in Britain. (BREEAM is the BRE Environmental Assessment Method.) PATE 6; Image of St Lukeà ¢Ã¢â€š ¬Ã¢â€ž ¢s CE Primary School, Blakenhall Gardens UK timber frame association preview 2010 page 26 (www.timber-frame.org) Other such projects include a NHS Adolescent Unit in Wales, where in this instance timber frame was ideal due to the fact that it was manufactured offsite and this meant less time onsite, making noise and disrupting the patients. A further example includes the theatre that was built on the Isle of Mull. Since this structure would be subject to winds and rain- it would be anticipated that steel or concrete would be the material of choice. However, cost of transporting these materials proved to be a huge factor, coupled with the fact that once again timber frame could be installed much quicker. PLATE 7; Image of the new timber frame theatre on Isle of Mull UK timber frame association preview 2010 page 26 (www.timber-frame.org) As well as these structures, timber frame prototypes have also been erected to improve our knowledge and findings on the performance of timber frame. One such prototype is the Kingspan Lighthouse which was designed and built to show how well timber frame would or would not perform when the structure was going to be an unorthodox shape. As with all buildings, small faults were found and good feedback was received on how improvements could be made. However, a Level 6 rating under the Code of Sustainable Homes was reached- even though this target doesnà ¢Ã¢â€š ¬Ã¢â€ž ¢t need to be achieved until 2016. PLATE 8; Image of Kingspan Lighthouse which achieved a Level 6 rating. UK timber frame association preview 2010 page 9 (www.timber-frame.org) 6.0 MOISTURE CONTENT All timber that is to be used for construction purposes will have a certain moisture content. Different timbers will have different moisture content depending on their use. For example, timber that is going to be used at junctions in the building where dampness could form will need to have a low moisture content. Kilns are used to dry timber out to a certain specification. Moisture content can be calculated by completing the following calculation; à ¢Ã¢â€š ¬Ã…“Moisture Content %= (wet weight)-(dry weight)/ dry weight x 100%à ¢Ã¢â€š ¬? Chudley and Greeno (2007, p.175) 6.1 THREAT OF ROT Rot spreading throughout a building is the nightmare of every client and builder, as it can cause unlimited damage and mean that in the extreme cases the building cannot be repaired. However, à ¢Ã¢â€š ¬Ã…“Dry timberà ¢Ã¢â€š ¬?, which is a timber with a moisture content of under 20%, is not at risk of decay. Lyons (2007, p.105) noted that à ¢Ã¢â€š ¬Ã…“à ¢Ã¢â€š ¬Ã‚ ¦ the reduction in water content to below 20% will arrest any incipient fungal decay, which can only commence above this critical level.à ¢Ã¢â€š ¬? This should dispel any doubts that timber is very exposed to rot. Furthermore, the timber is also sprayed with necessary preservatives before installation to satisfy Building Regulation requirements. 7.0 CONCLUSION This report has briefly looked at how timber frame structures perform in numerous fields. It has also outlined how timber frame can be used in a variety of different structures- some of which many people would not associate timber frame construction with. It is therefore clear to see that this market will continue to grow, with the market possibly accelerating more so in Ireland in the near future. This is because Ireland is possibly the country which has the most room for growth in this sector, coupled with the fact that Scotland is nearby and would prove to be a very good source for timber. This report has also addressed concerns relating to timber and the perception many people still have about using timber in construction- such as fire hazards, risk of rot, unable to be used in multi-storey buildings; to name just a few. Once people are better educated and made more aware about using timber as the structure for buildings- then these myths will soon be dispersed. After all, as mentioned in the introduction; this form of construction is used in countries such as USA, Canada and Australia. It is of course the most popular form of construction used in the developed world- meaning it can handle the hot summers in Australia and also the windy wets nights and wintry conditions in Scotland. It has taken Britain and Ireland many years to adopt this practice and some will no doubt wish to never embrace timber frame construction. However, the old adage à ¢Ã¢â€š ¬Ã…“the times are changingà ¢Ã¢â€š ¬? certainly springs to mind at this point. With the Government endorsing the use of timber frame and with environmental and sustainability concerns the topic of conversation on a regular basis- this definitely seems like the route to take. à ¢Ã¢â€š ¬Ã…“Timber Frame is probably the biggest single advance in building methods in recent yearsà ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬?(www.walkertimbergroup.com) The above quote certainly is a bold one but with the facts in figures produced in this report; it is hard to argue against such a statement. 8.0 REFERENCES- Websites Source- UK timber frame association preview 2010 (pdf file) (www.timber-frame.org) [accessed 4th February] Source-Fire Safety on Timber Frame Construction Sites (pdf file) (www.timber-frame.org) http://www.ramstowndevelopments.com/index.php?id=47 [accessed 4th February] http://www.framewiseltd.co.uk/Systems/i-joists-the-simple-framing-system.html [accessed 4th February] http://www.trada.co.uk/techinfo/library/view/6BA4B8A2-79A8-451B-AB6F-474D37137B4F/Timber+frame+construction+-+an+outline/ar01s02.html [accessed 5th February] http://www.timber-frame.org/html/Building_And_Construction/Benefits_of_Timber_Frame/ [accessed 5th February] http://www.scotframetimberengineering.co.uk/ [accessed 5th February] http://www.deesidetimberframe.co.uk/environmental.htm [accessed 5th February] http://www.walkertimbergroup.com/walkertimber/products/products/timberframe1 [accessed 5th February] Books Chudley, R., Greeno, R. (2008) Building Construction Handbook. 7th ed. Oxford: Elsevier Ltd Chudley, R., Greeno, R. (2007) Construction Technology. 4th ed. Essex: Pearson Education Limited Lyons, A., (2007) Materials for Architects Builders. 3rd ed. Oxford: Elsevier Ltd.

Preserving Minority Languages Essay -- Anthropology Globalization

Language has been used as a means of communication among society members as time began. Each and every community has its own unique language, which is used to convey a certain message from the sender to the recipient. For a language to be appreciated as a means of communication among society members, it should be clear, simple to use and understandable among the users. There are approximately six thousand different languages, which are used in the whole world. Such languages are unique and distinct from each. Yagmur (2009) supports that; a language acts as a reflection or like a mirror of the society from which it originates. For instance, a language may portray the culture and origin of a certain community. Due to current globalization effects, language integration has constantly been taking place. This has made some languages be adopted as the major communication tools. For example, English and French languages are now being used as the major languages of communication. People who are not conversant with these languages are being termed as society laggards who do not appreciate changes. This has received some support from Jiang (2007) who adds that; this language integration has caused some languages to be marginalized. Such languages that are considered to be minor are usually spoken or used by communities, which are minority and marginalized within the society. Various debates on whether to preserve these marginalized languages have arisen over the past decades. These minority’s languages accrue various society elements like culture, religion, beliefs, behaviors and practices. These languages are like an archeological site that should be preserved. As a result, marginalized la nguages should be preserved because they carry wit... ...gr114> LaPonce, J. A. 2004. â€Å"Minority Languages and Globalization.† Nationalism & Ethnic Politics, Spring Vol. 10 Issue 1, p15-24. Ushioda, E. 2006. â€Å"Language Motivation in a Reconfigured Europe: Access, Identity, Autonomy.† Journal of Multilingual & Multicultural Development, Vol. 27 Issue 2, p148-161. Yagmur, K. 2009. â€Å"Language use and ethnolinguistic vitality of Turkish compared with the Dutch in the Netherlands.’ Journal of Multilingual & Multicultural Development, Vol. 30 Issue 3, p219-233.